LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (19 Engine - Cooling 2.9L -- 9YA - Cayenne (9YA)) >> WM, 192019 Removing And Installing Cooling Fan Housing >> Installing Cooling Fan Housing

Installing Cooling Fan Housing

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Tighten screws for release element.

      > Tightening torque 8 Nm (5.9 ftlb.) 

scientia non olet · About LEMON Manuals