Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screws for coolant pipes | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screw for lower chain housing cover | M6 x 25 (19 ea.)/replace aluminum screws with steel screws, observe specified tightening sequence | Initial tightening | 3 Nm (2 ftlb.) | ||
| Screw for lower chain housing cover | Final tightening | + 90° | |||
| Upper screws on chain housing cover in chain box | Replace following removal. | Initial tightening | 3 Nm (2 ftlb.) | ||
| Upper screws on chain housing cover in chain box | Replace following removal. | Tightening torque | 8 Nm (6 ftlb.) | ||
| Upper screws on chain housing cover in chain box | Replace following removal. | Final tightening | + 90° |