LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (13 Engine - Crank Drive, Pistons 2.9L -- 9YA - Cayenne (9YA)) >> WM, 134819 Removing And Installing Crankshaft (V6 Turbo) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove engine.

    > Removing and installing engine 

  2. Secure engine on assembly support.

    > 100113 SECURING ENGINE ON ASSEMBLY SUPPORT (V6 TURBO)

  3. Drain engine oil.

    > Draining and filling in engine oil 

  4. Remove crankcase cover.

    > Removing and installing front crankcase cover (V8 biturbo) 

  5. Remove timing chain.

    > WM, 158419 REMOVING AND INSTALLING CAMSHAFT ACTUATOR (V6 TURBO)

    > 154719 REMOVING AND INSTALLING GUIDE AND TENSIONING RAILS

  6. Remove piston.

    > Removing and installing pistons 

  7. Remove oil pump sprocket.

    > Removing and installing oil pump (V6 Turbo) 

scientia non olet · About LEMON Manuals