LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (10 Engine - Crankcase, Suspension 2.9L -- 9YA - Cayenne (9YA)) >> WM, 105519 Removing And Installing Oil Separator (V6 Turbo) >> Installing Oil Separator

Installing Oil Separator

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:
    1. 1.1  Clean sealing surfaces.
    2. 1.2  Replace seals.
    3. 1.3  Tighten screws for oil separator to > Tightening torque 9 Nm (6.5 ftlb.)  .
scientia non olet · About LEMON Manuals