LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (10 Engine - Crankcase, Suspension 2.9L -- 9YA - Cayenne (9YA)) >> WM, 103519 Removing And Installing Engine Mounts (V8 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Left side only: 

    Secure coolant lines to the front axle carrier.

    G15210580Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Coolant lines on the front left axle carrier

    1. 1.1  Tighten screw -2-  .

      Tightening torque: > Tightening torque 9 Nm (6.5 ftlb.) 

  2. Secure anti-roll bar on the front axle carrier.

    > 407719 REMOVING AND INSTALLING STABILIZER, FRONT

    > 407719 REMOVING AND INSTALLING STABILIZER, FRONT [PDCC]

  3. Only for V8 Hybrid: 

    Install the air-conditioning compressor.

    > 873419 REMOVING AND INSTALLING AIR-CONDITIONING COMPRESSOR

  4. Install wheel housing liner.

    > Refer to the appropriate service information.

  5. Install front underbody cover.

    >Refer to the appropriate service information.