Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screws securing generator bracket to crankcase | Replace following removal. | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screws securing generator bracket to crankcase | Replace following removal. | Final tightening | + 90° | ||
| Screw securing tensioning roller for air-conditioning compressor to air-conditioning compressor bracket | Tightening torque | 25 Nm (19 ftlb.) | |||
| Aluminium screw securing air-conditioning compressor bracket to crankcase | Replace following removal. | Initial tightening | 8 Nm (6 ftlb.) | ||
| Aluminium screw securing air-conditioning compressor bracket to crankcase | Replace following removal. | Final tightening | + 90° |