LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (10 Engine - Crankcase, Suspension E-Hybrid -- 9YA - Cayenne (9YA)) >> WM, 108319 Removing And Installing Engine Cover (Design Cover) (V6 Turbo) >> Removing Engine Cover

Removing Engine Cover

WARNING: This page is about a different variant/trim than selected.
  1. Remove engine cover -2-  .
G15209706Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Engine cover

  1. 1.1 Carefully open clips -1-  using a plastic wedge.
  2. 1.2 Lift engine cover -2-  up at the front -Arrows-  and pull it out of the guide at the rear.