LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (24 Fuel System - Electronic Injection 2.9L -- 9YA - Cayenne (9YA)) >> WM, 244619 Removing And Installing Centre Intake-Air Distributor (V6 BITURBO) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install cover for front underbody.

    > Removing and installing cover for front underbody 

  2. Install throttle housing.

    > Removing and installing throttle housing (V6 biturbo) 

  3. Install oil separator vent line.

    > Removing and installing oil separator (V6 Turbo) 

  4. Install intake manifold.

    > Removing and installing intake manifold (V6 biturbo) 

  5. Install intermediate piece.

    > Removing and installing intermediate piece 

scientia non olet · About LEMON Manuals