LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (63 Bumper (Wagon) -- 9YA - Cayenne (9YA)) >> WM, 637019 - Removing And Installing Trim Frame For Tailpipe Cover >> Installing Trim Frame For Tailpipe Cover

Installing Trim Frame For Tailpipe Cover

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screw securing trim frame for tailpipe cover to rear bumper: > Tightening torque 3.5 Nm (2.6 ftlb.) 

scientia non olet · About LEMON Manuals