LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (63 Bumper (Wagon) -- 9YA - Cayenne (9YA)) >> WM, 635719 - Removing And Installing Rear Retaining Strip >> Technical Values

Technical Values

WARNING: This page is about a different variant/trim than selected.
Location Description Type Basic value Tolerance 1 Tolerance 2
Nuts for retaining strip on tail light Item 1 Tightening torque 4 Nm (3 ftlb.)    
G15237261Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Retaining strip on tail light
         
Screw for retaining strip on tail light Item 2 Tightening torque 2.5 Nm (1.75 ftlb.)    
G15237262Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Retaining strip on tail light
         
Nuts on retaining strip, centre Item 1 Tightening torque 4 Nm (3 ftlb.)    
G15237263Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Nuts
         
Retaining strip to tail light Item Z Gap dimension 8 mm    
G15237264Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Gap from retaining strip to tail light
         
G15237265Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Gap from retaining strip to tail light
         
Retaining strip to tail light Item X Gap dimension 6 mm    
G15237266Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Gap from retaining strip to tail light