LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (63 Bumper (Wagon) -- 9YA - Cayenne (9YA)) >> WM, 631719 - Removing And Installing Retaining Strip >> Installing Retaining Strips

Installing Retaining Strips

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten fastening screws to the specified tightening torque > Tightening torque 6 Nm (4.5 ftlb.)  until secure.

    Tighten fastening nuts to the specified tightening torque > Tightening torque 4 Nm (3 ftlb.)  .

scientia non olet · About LEMON Manuals