Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw securing air duct for brake to front apron, bottom | Item 1 | Tightening torque | 3 Nm (2 ftlb.) | ||
|
Screw on air duct for brake |
|||||
| Screw securing front apron to wing | Item 1 | Tightening torque | 2.5 Nm (1.75 ftlb.) | ||
|
Screw on front apron |
|||||
| Screws securing front apron to front end, bottom | Item 1 | Tightening torque | 4.5 Nm (3.25 ftlb.) | ||
|
Screws securing front apron to front end at the bottom |
|||||
| Screws securing front apron to front end, top | Item 1 | Tightening torque | 3 Nm (2 ftlb.) | ||
|
Screws securing front apron to front end at the top |