Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw plug, M14 x 1.5 (crankshaft staking bore) | Dry | Tightening torque | 25 Nm (19 ftlb.) | ||
| Screw plug, M14 x 1.5 (crankshaft staking bore) | Oiled | Tightening torque | 20 Nm (15 ftlb.) | ||
| Fastening screws for heat shield on cylinder head cover, inner | M6 x 12 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| screws securing guide plate to cylinder head | tightening torque | 9 Nm (6.5 ftlb.) |