LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (15 Engine - Cylinder Head, Valve Drive 4.0L -- 9YA - Cayenne (9YA)) >> WM, 155519 Removing And Installing Solenoid Hydraulic Valve For Valve Lift Adjustment (V8 BITURBO) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Only after removing solenoid hydraulic valve for valve lift adjustment at outlet side of cylinder 2: 

    Install right oil separator.

    > 105519 REMOVING AND INSTALLING OIL SEPARATOR (V8 BITURBO)

  2. Only after removing solenoid hydraulic valve for valve lift adjustment on right cylinder bank: 

    Install the torque support.

    > 103719 REMOVING AND INSTALLING TORQUE SUPPORT

  3. Only after removing solenoid hydraulic valve for valve lift adjustment on cylinder 5: 

    Install intermediate piece.

    > WM, 505219 REMOVING AND INSTALLING INTERMEDIATE PIECE

  4. Install air cleaner housing.

    > 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING

scientia non olet · About LEMON Manuals