Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screws for upper chain case lid | M6 x 2C | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Nuts on chain case cover, top | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Nut securing holder for additional coolant pump (run-on) | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Double screw for additional coolant pump (run-on) | M6 x 14/M6 x 14 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screw securing coolant line to engine/transmission | M6 x 16 | Tightening torque | 9 Nm (6.5 ftlb.) |