Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screws for chain housing cover | M6 x 25 (19ea.), observe tightening sequence | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Cylinder head to crankcase | M6 x 35 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Cylinder head to crankcase | M6 x 35 | Torque angle | 25° | ||
| Screw securing coolant line to engine/transmission | M6 x 16 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screw securing coolant line to engine/transmission | M6 x 20 | Tightening torque | 9 Nm (6.5 ftlb.) |