Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Crankshaft vibration damper | Replace screw | Initial tightening Step 1 | 50 Nm | ||
| Crankshaft vibration damper | Replace screw | Initial tightening Step 2 | 100 Nm | ||
| Crankshaft vibration damper | Replace screw | Final tightening | 180 Grad | ||
| Screw for deflection roller (air-conditioning compressor) | M8 x 37/replace | Tightening torque | 25 Nm (19 ftlb.) | ||
| Screws securing counterhold tool to crankcase | Item X | Tightening torque | 23 Nm (17 ftlb.) | ||
| Screws securing counterhold tool to crankcase | Item X | Tightening torque | 23 Nm (17 ftlb.) |