Preliminary Work
WARNING: This page is about a different variant/trim than selected.
For camshaft sensor of the intake camshafts on bank 1 and bank 2:
Remove air cleaner housing cover.
> 242419 REMOVING AND INSTALLING AIR-CLEANER ELEMENT
For camshaft sensor of the outlet camshaft, bank 1
Remove air cleaner housing.
> 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING
Remove torque support.
> 103719 REMOVING AND INSTALLING TORQUE SUPPORT
For camshaft sensor of the outlet camshaft, bank 2:
Remove air cleaner housing.