LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (28 Ignition System, PREGLOW System E-Hybrid -- 9YA - Cayenne (9YA)) >> WM, 282020 Removing And Installing Ignition Coils (V6 Turbo) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Switch off ignition and remove ignition key.
  2. Remove air cleaner housing.

    > Removing and installing air cleaner housing 

  3. Only when removing ignition coils for cylinders 2 and 3: 

    Remove torque support.

    > Removing and installing torque support 

  4. Only for hybrid models for ignition coils, page 4-6:  Loosen coolant reservoir for low-temperature cooling system.
    G15242764Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Reservoir for low-temperature system

    Information 

    The cooling system must not be opened.

    1. 4.1  Release retaining lugs -2-  using a suitable tool.
    2. 4.2  Lift the reservoir -1-  up out of the holder.
    3. 4.3  Remove the reservoir holder -2-  .
      G15242765Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Holder for reservoir

    4. 4.3.1  Unscrew screws -1-  and remove holder -2-  .
scientia non olet · About LEMON Manuals