Disassembling Rear Lid

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Unclip covers -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Covers
Unscrew screws -1- and remove guide wedge -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws for guide wedge
Unscrew adjusting buffer -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Adjusting pads
Remove ball hitch -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Ball hitch
1. 4.1 Unscrew and remove screws -2- .
2. 4.2 Remove ball hitch -1-.
Remove number plate cover -1-.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Number plate cover
1. 5.1 Unclip expansion rivets -2- .
2. 5.2 Unscrew and remove screws -3- .
3. 5.3 Remove number plate cover -1-.
Remove rubber sleeves -1-.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rubber sleeves