Assembling Rear Lid
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Assembly is performed in reverse order. Pay particular attention to the following:
Tightening torque for screw on number plate cover: > Tightening torque 4 (3 ftlb.) Nm
Tightening torque for ball hitch screw: > Tightening torque 10 (7.5 ftlb.) Nm
Tightening torque for screw securing guide wedge to rear lid: > Tightening torque 6 (4.5 ftlb.) Nm