LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (55 - Lids, Flaps -- Cayenne 9YB) >> WM, 559019 Removing And Installing Rear Lid >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install actuating cylinder for rear lid.

    55731930 REMOVING AND INSTALLING ACTUATING CYLINDER FOR REAR LID 

  2. Install wire harness for rear lid.

    >*** 97271930 Removing and installing wire harness for rear lid

  3. Check gap dimensions of rear lid and adjust if necessary.

    >55901530 ADJUSTING REAR LID 

  4. Only for vehicles with reversing camera (I-no. KA2): 

    Calibrate reversing camera.

    >*** 9143K2 Calibrating reversing camera

  5. Only for vehicles with Surround View camera (I-no. KA6): 

    Calibrate Surround View camera.

    >*** 917225 Calibrating Surround View camera