Assembling Front Lid
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
Information about the painting process can be found in the Paint Service Information.
Information
- Carefully clean body in the installation area with isopropanol to remove any dirt.
- Always use a clean, lint-free cloth.
- The room and object temperature must be at least +15 °C.
- Humidity must be 50% +/- 10%.
- The parts must have been bonded for at least 72 hours before washing the vehicle in a car wash.
- Paint the front lid.
- Install front lock upper parts.
- Clip in seal.
- Install front logo.
>*** 660719 Removing and installing front logo
- Install insulation for engine compartment lid.
>*** 700419 Removing and installing insulation for engine compartment lid
- Affix all stickers that were on the old lid on the new lid.