Installing Front Lock Upper Part

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Position front lock upper part -1- and fit nuts -2- by hand.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Lock upper part
Close the lid slowly until the clip -1- for the front lock upper part is touching the lower part of the lock -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Lower part of lock
Position front lock upper part so that the clip -1- is centred flush with the slot in the lower part of the lock -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Lower part of lock
Open the lid again and tighten nuts -2- to > Tightening torque 8 (6 ftlb.) Nm .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Lock upper part