Removing Cover For Centre Underbody

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

The number of screws, clips, electric plug connections, holders and trim panels can vary depending on equipment.
The illustrations for removing and installing are shown only on one equipment variant and can differ from the actual equipment variant.
Some steps must be carried out automatically.

Remove cover for centre underbody -4- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cover for centre underbody
1. 1.1 Unscrew nuts -1- .
2. 1.2 Unscrew and remove screws -2 and 3- .
3. 1.3 Remove cover for centre underbody -4- .