WM, 519219 Removing And Installing Cover For Front Underbody: Notes
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
TECHNICAL VALUES SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Front section of front underbody cover Front section of front underbody cover |
Item 2 | Tightening torque | 3 (2 ftlb.) Nm | ||
| Front section of front underbody cover Front section of front underbody cover |
Item 1 | Tightening torque | 6 (4.5 ftlb.) Nm | ||
| Rear section of front underbody cover Rear section of front underbody cover |
Item 1 | Tightening torque | 3 (2 ftlb.) Nm | ||
| Side section of front underbody cover Fastening screws for front underbody cover |
Item 2 | Tightening torque | 3 (2 ftlb.) Nm |