Installing Cover For Front Underbody
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
Micro-self-locking screws
Fit new screws following removal.
- Installation is performed in reverse order. Pay particular attention to the following:
Screw in fastening screws and tighten to > Tightening torque 3 (2 ftlb.) Nm .
Screw in new fastening screws and tighten to > Tightening torque 6 (4.5 ftlb.) Nm .
Screw in fastening screws and tighten to > Tightening torque 3 (2 ftlb.) Nm .
Screw in fastening screws and tighten to > Tightening torque 3 (2 ftlb.) Nm .