Removing Inner Reinforcement
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Information
Only make cuts in the top plate. Make sure not to damage the plate underneath when doing this.
- Separate welded seams on inner reinforcement.
- 1.1
Separate welded seams -A-
in the front area.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Welded seams on front inner reinforcement
- 1.2
Separate welded seams -A-
in the rear area.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Welded seams on rear inner reinforcement
- Drill out spotwelds on inner reinforcement.
- 2.1
Separate spotwelds in the front area.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Spotwelds on front inner reinforcement
- 2.2
Separate spotwelds in the rear area.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Spotwelds on rear inner reinforcement
- Remove inner reinforcement.