Removing Side Member Reinforcement
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Drill out spotwelds > Spotwelds.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Spotwelds
- Heat bonding areas > Bonding areas
using > V.A.G 1416 - hot-air blower
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Bonding areas
- Remove side member reinforcement.