LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (51 - Body Center, Roof, Frame 9YB) >> WM, 514255 Replacing B-Pillar Reinforcement >> Removing B-Pillar Reinforcement

Removing B-Pillar Reinforcement

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drill out spotwelds -A and B-  .
    G14347648Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Spotwelds 1

  2. Drill out spotwelds -A and B-  .
    G14347649Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Spotwelds 2

  3. Heat upper bonding areas > Upper bonding areas  using > V.A.G 1416 - hot-air blower  .
    G14347650Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Upper bonding areas

  4. Heat lower bonding areas > Lower bonding areas  using > V.A.G 1416 - hot-air blower  and remove B-pillar reinforcement.
    G14347651Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lower bonding areas

scientia non olet · About LEMON Manuals