LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (51 - Body Center, Roof, Frame 9YB) >> WM, 51031935 REMOVING AND INSTALLING GLASs Roof >> Tools And Materials

Tools And Materials

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The square cutting wire (A9) must not be used for glass and carbon-fibre composite roofs.

G14347012Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tools and materials for removing and installing glass roof

Double cartridge gun VAS 5237; see Workshop Equipment Service Information, Chapter 3.5
Suction cups VAG 1344; see Workshop Equipment Service Information, Chapter 3.5
Special electric cutter (fine) VAG 1561 A; see Workshop Equipment Manual Service Information, Chapter 3.5
Flashing knife, U-shaped 639.031.130.22; see Parts Catalogue, Main Group 8
2-component window adhesive 000.043.300.94, contains set components H1-H8; see Parts Catalogue, Main Group 8
H1  Cleaning solution
H2  Primer
H3  Activator
H4  Swab
H5  Cartridge, component A
H6  Cartridge, component B
H7  Mixing nozzle
H8  Processing nozzle
G14347013Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Removal kit for flush bonded windows VAG 1474 B, contains set components A1-A9; see Workshop Equipment Service Information, Chapter 3.5
Cutting thread; see Pars Catalogue, Main Group 8
A1  Guide rail
A2  Cutting tool (wire holder)
A3  Spooling device
A4  Awl
A5  Guide rail
A6  Filler
A7  Steering roller with arm bracket
A8  Handle
A9  Square cutting wire