Assembling rear apron
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Assembly is performed in reverse order. For ParkAssist (I-no. 7X5)
, pay particular attention to the following:
- 1.1
Clean bonding surface -1-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Bonding surface
- 1.2
Pull protective film -1-
off the adhesive tape.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Protective film on bonding sufdtes
- 1.3
Affix the holders for the parking sensois on the contour of the rear apron mounting and press on evenly using a suitable tool.