LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (63 - Bumpers 9YA) >> WM, 635519 Removing And Installing Rear Apron >> Installing Rear Apron

Installing Rear Apron

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Installing rear apron 

  1. Installation is performed in reverse order. Pay particular attention to the folowing:

    Tighten screw securing rear apron to retaining frame to > Tightening torque 2.5 N.m (1.75 ft.lb)  .

    Tighten screw securing rear apron to heat shield to > Tightening torque 3.5 N.m (2.5 ft.lb)  .

    Tighten screw on tailgate lock to > Tightening torque 10 N.m (7.5 ft.lb)  .

    Tighten screw securing rear apron to frame for light to > Tightening torque 2.5 N.m (1.75 ft.lb)  .

scientia non olet · About LEMON Manuals