LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (63 - Bumpers 9YA) >> WM, 631719 Removing And Installing Retaining Strip >> Installing Retaining Strips

Installing Retaining Strips

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten fastening screws to the specified tightening torque > Tightening torque 6 N.m (4.5 ft.lb)  until secure.

    Tighten fastening nuts to the specified tightening torque > Tightening torque 4 N.m (3 ft.lb)  .

scientia non olet · About LEMON Manuals