LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (63 - Bumpers 9YA) >> WM, 631555 Replacing Front Apron (Turbo) >> Disassembling Front Apron

Disassembling Front Apron

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The number of electric plug connections, lines, fastening parts and sensors will vary depending on equipment.
  1. Remove radiator grille (Turbo).

    66051920 Removing and installing radiator grille (Turbo)

  2. Remove number plate cover.

    668319 Removing and installing number plate cover

  3. Remove front wire harness.

    971519 Removing and installing front wire harness

  4. For USA vehicles (CO2J:

    Remove side marker light.

    945219 Removing and installing side marker light

  5. Remove front spoiler.

    660319 Removing and installing front spoiler

  6. Unclip cover on towing lug
    G14277494Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Cover for towing lug

    1. 6.1  Release locking lug -2-  and press out cover on towing lug
    2. 6.2  Unhook safety strap -3-  .
  7. Unclip lower side moulding -1- (-2-  ).
    G14277495Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Moulding

  8. Unclip lower side moulding -1-  (-2-  ).
    G14277496Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lower side moulding

  9. Unclip holder -1-  together with ParkAssist parking sensor -2-  .
    G14277497Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    ParkAssist parking sensor holder

  10. For ParkAssist (I-no. 7X5) 

    Unclip ParkAssist parking sensor -1-  from holder -2-  .

    G14277498Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    ParkAssist parking sensor