Assembling Front Apron

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: The bonding surfaces must be clean and free of grease.

IMPORTANT: Temperature

A processing temperature of between 20°C and 25°C applies to the surrounding area and materials.

For ParkAssist (I-no. 7X5):
Clean bonding surface -1- with isopropanol.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding surface
Pull protective film -1- off the adhesive tape.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Protective film
Affix the holders for the ParkAssist parking sensors -1- on the contour of the front apron mounting and press on evenly using a suitable tool.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

ParkAssist parking sensor holder
The remaining installation steps are performed in reverse order.