LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (63 - Bumpers 9YA) >> WM, 631519 Removing And Installing Front Apron >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position air duct for brake -2-  , screw in fastening screw -1-  and tighten to > Tightening torque 3 N.m (2 ft.lb)  .
    G14277398Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Fastening screw

    2 Only vehicles without Sport Design:  Install front wheel covers.

    661919 Removing and installing front wheel cover

  2. Install front wheel housing liner in the front apron area.

    505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER

  3. Secure front cover in the front apron area and air duct for brake.

    519219 REMOVING AND INSTALLING FRONT COVER

  4. Install cover for lock support.

    703919 Removing and installing cover for lock support

  5. Secure battery ground strap.

    978509 Loosening and securing ground strap for battery

  6. For vehicles with front assistance systems:

    Calibrate infrared camera.

    908055 Replacing infrared camera

    Calibrate front corner radar.

    916625 Calibrating front corner radar

    Adjust control unit for distance measuring sensor.

    278555 Replacing control unit for distance measuring sensor