Installing Front Apron
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
During installation, make sure that all locking lugs are positioned correctly and have engaged fully. Use a suitable tool to help if necessary.
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten fastening screws on top of wing to > Tightening torque 2.5 N.m (1.75 ft.lb) .
Tighten fastening screws on lower front end to > Tightening torque 4.5 N.m (3.25 ft.lb).
Tighten fastening screws on upper front end to > Tightening torque 3 N.m (2 ft.lb).