Installing Front Bumper

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Installation is performed in reverse order. Pay particular attention to the following:

Tighten pre-assembly screws to > Tightening torque 8 N.m (6 ft.lb) .
Tighten screws to > Tightening torque 60 N.m (44 ft.lb) and observe the tightening sequence > Tightening sequence.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tightening sequence