LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (55 - Lids, Flaps 9YA) >> WM, 559119 Removing And Installing Rear Lid Hinge >> Installing Rear Lid Hinge

Installing Rear Lid Hinge

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Nut securing lid hinge to bodyshell > Tightening torque 23 N.m (17 ft.lb) 

  2. Remove the marking you made earlier > Installation position of rear lid hinge. 
    G14277358Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installation position of rear lid hinge

scientia non olet · About LEMON Manuals