Assembling Rear Lid
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Assembly is performed in reverse order. Pay particular attention to the following:
Tightening torque for screw securing guide wedge to rear lid > Tightening torque 6 N.m (4.5 ft.lb)
Tightening torque for ball joint screw > Tightening torque 10 N.m (7.5 ft.lb)
Tightening torque for screw on number plate cover > Tightening torque 4 N.m (3 ft.lb)