LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (55 - Lids, Flaps 9YA) >> WM, 559019 Removing And Installing Rear Lid >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install actuating cylinder for rear lid.

    557319 REMOVING AND INSTALLING ACTUATING CYLINDER FOR REAR LID 

  2. Install wire harness for tailgate.

    972719 Removing and installing wire harness for tailgate

  3. Check gap dimensions of rear lid and adjust if necessary.

    559015 ADJUSTING REAR LID 

    Only for vehicles with reversing camera (l-no. KA2; KA6) 

  4. Calibrate reversing camera.

    9143K2 Calibrating reversing camera