LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (55 - Lids, Flaps 9YA) >> WM, 558719 Removing And Installing Upper Part Of Rear Lid Lock >> Removing Rear Upper Part Of Lid Lock

Removing Rear Upper Part Of Lid Lock

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Moving components
  • Danger of limbs being trapped or severed 
    • Do not reach into the danger area.
    • Secure the system to prevent it from being activated accidentally.
    • Keep third parties away from the danger area.
IMPORTANT:
  • When removing the upper part of the lock using a closing aid, first disconnect the plug connection for the power supply. 
  • This prevents the closing aid motor from starting up while you are disconnecting the plug connection/control system. 
  1. Switch off ignition and remove remote control.
  2. Release and unplug electric plug connection -1-  .
    G14277312Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric plug connection

  3. Unscrew fastening nuts -1-  and loosen upper part of rear lid lock -2-  .
    G14277313Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Nuts

  4. Unclip bowden cable -1-  at the holder -2-  .
    G14277314Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bowden cable

  5. Disengage bowden cable -1-  on upper part of rear lid lock -3-  .
    G14277315Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bowden cable

scientia non olet · About LEMON Manuals