LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (55 - Lids, Flaps 9YA) >> WM, 558719 Removing And Installing Upper Part Of Rear Lid Lock >> Installing Upper Part Of Rear Lid Lock

Installing Upper Part Of Rear Lid Lock

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten fastening nuts on upper part of rear lid lock. > Tightening torque 21 N.m (16 ft.lb) 

scientia non olet · About LEMON Manuals