LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (55 - Lids, Flaps 9YA) >> WM, 558619 Removing And Installing Lower Part Of Rear Lid Lock >> Installing Lower Part Of Rear Lid Lock

Installing Lower Part Of Rear Lid Lock

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten fastening nuts -1-  slightly by hand.
    G14277308Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Fastening nuts

  2. Move lower part of rear lid lock into installation position.
  3. Position lower part of rear lid lock -2-  on the old impressions.
    G14277309Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lower part of rear lid lock

    1. 3.1  Check position of lower part of rear lid lock -2-  and correct it if necessary.
  4. Tightening fastening nuts -1-  > Tightening torque 21 N.m (16 ft.lb)