LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (55 - Lids, Flaps 9YA) >> WM, 555719 Removing And Installing Rear Lid Release >> Emergency Release - Rear

Emergency Release - Rear

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove trim -1-  .
    G14277275Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Cover

  2. Release lock.
    G14277276Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Release

    1. 2.1  Insert a screwdriver into the slot on the trim panel -arrow A-. 
    2. 2.2  Guide screwdriver through the slot on the cover plate -3-  .
    3. 2.3  Insert screwdriver into the release -2-  .
    4. 2.4  Support the screwdriver on the edge of the plate -3-  .
    5. 2.5  Use screwdriver to turn release in direction of arrow -arrow B-  ,

      Tilt screwdriver downwards while doing so -arrow C-  .

      Lock unlocks audibly.

  3. Open the cover from outside.