Assembling Front Lid
WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Information about the painting process can be found in the Paint Service Information.
IMPORTANT:
- Carefully clean body in the installation area with isopropanol to remove any dirt.
- Always use a clean, lint-free cloth.
- The room and object temperature must be at least +15 °C.
- Humidity must be 50%+/-10%.
- The parts must have been bonded for at least 72 hours before washing the vehicle in a car wash.
- Paint the front lid.
- Install front lock upper parts.
- Clip in seal,
- Install front logo.
660719 Removing and installing front logo
- Install insulation for engine compartment lid.
700419 Removing and installing insulation for engine compartment lid
- Affix all stickers that were on the old lid on the new lid.