LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (55 - Lids, Flaps 9YA) >> WM, 551819 Removing And Installing Front Lock Upper Part >> Installing Front Lock Upper Part

Installing Front Lock Upper Part

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position front lock upper part -1-  and fit nuts -2-  by hand.
    G14277219Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lock upper part

  2. Close the lid slowly until the clip -1-  for the front lock upper part is touching the lower part of the lock -2-  .
    G14277220Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lower part of lock

  3. Position front lock upper part so that the clip -1-  is centred flush with the slot in the lower part of the lock -2-  .
    G14277221Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lower part of lock

  4. Open the lid again and tighten nuts -2-  to > Tightening torque 8 N.m (6 ft.lb)  .
    G14277222Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Lock upper part

scientia non olet · About LEMON Manuals