LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (53 - Body Rear 9YA) >> WM, 538255 Replacing Rear Cross Member >> Removing Rear Cross Member

Removing Rear Cross Member

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew self-tapping screws
    Fig 1: Rear Cross Member Component Location
    G14277182Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Self-tapping screws

  2. Remove punch rivets Punch rivets  using VAS 852 001 - dent removal unit  and VAS 6790 - compact booster  .

    5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

    G14277183Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Punch rivets

  3. Heat bonding areas Bonding areas  using V.A.G 1416 - hot-air blower  .
    G14277184Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  4. Remove rear cross member.
scientia non olet · About LEMON Manuals