LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (53 - Body Rear 9YA) >> WM, 536919 Removing And Installing Rear Wheel Housing Liner >> Installing Rear Wheel Housing Liner

Installing Rear Wheel Housing Liner

WARNING: This page is about a different car, the 2021 Porsche Cayenne, 2020 Porsche Cayenne, and 2019 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse of der. Pay particular attention to the following:

    Screw in fastening screws for rear wheel housing liner and tighten to Tightening torque 2 N.m (1.5 ft.lb)  .

    Screw on nuts for rear wheel housing liner and tighten to Tightening torque 2.5 N.m (1.75 ft.lb)  .

scientia non olet · About LEMON Manuals